Recent content by Routemaster

I second that, you can put me down in the column of regrets of purchasing this used 2017 Arlington rig.

Well fridge is running on solar/shore power having no problems at all. I after all this time never noticed that the fridge door has a bend in it could be not totally shutting off air tight. I also bought a pair of gaskets @ $400.00 for the doors and installed them no temperature change at this...

My open window hits the ladder.

Any idea how one gets to clean the "J" condenser (page 16) in the Frigidaire been in that cubby hole now for 7years. I have looked in the tools drop down not seeing how to get to it or what. If I have to move her out I see two screws at the vent, there must be more than that holding her in. Den.

OK, I do not think the antics of this fridge is to do with the power now. We are sitting at the dining table and seeing the temperature gauge changes got something to do with the room temps yes? Yesterday the temp went up so I switched on the mini split cold air going straight across the room...

Mine looks like it is aluminum extruded angle I think spot welded on, may a fine weld might work also a rivet from the outside to attach it?

https://www.pellandent.com/Motorhome_Product_Details.aspx?ProductID=9606&Return=305 Is this what you are after I have bought from the a few times. Den.

Hey Dave. The batteries are six brand new Lifepo4 100amp. Could it be that the power from the Magnum 1000 inverter be not as smooth as power out of the wall and that would cause it play around with the circuit boards? Dave, also a few years ago in our Everest we popped the boards twice in a LG...

After installing my solar I thought I would now would run the fridge off the Magnum factory installed inverter been ok for a while... weeks maybe then yesterday the freezer rose to #7 so I switched back to shore power and she went back down to #0 after a hour or so, this morning now today she...

Is there any reason why I could not add extra fill in the docking cupboard .I was looking in the breaking into the pipe going to the tank. Reason being when on Anderson tank fill can not use city at same time. Make sense?

When they drill the black for the down pipe the slug may have got left in the tank to float about. This happened to me once.

Maybe you have a black tank slug floating to the gate valve?

I think my front cap is about to hatch a chick or something, cracks radiating out !! job to take pictures cause of the shine anyone had this problem with cracks whats the best fix also on the rear cap some either side. Yet another thing to add to the list.

You may have this problem?

I fixed the sagging problem for me looks way better eyeing it from the landing. Is there a chance that the backing plate is engendered wood with the bow built into it to create a draft for a run-off, then mine and the other folks were installed upside down which caused the sagging? I jacked up...