Recent content by oldelmer1

You have to figure out what awning you have, should be a tag on the roller, but of course is you cant get the awning out, you can't read the tag. Should be a 9100 or 9200 if it's a Dometic. Google is your friend.

This is where mine leaked, down at the bottom of the slide. Water was running in, I removed all the screws, which were rusted, and out new butyl caulk on and new screws and then caulked the entire metal strip. No more leak. Also check the caulk around the face of the slide, it's like the outer...

Oh, and I did replace the bathroom skylight as ours was all faded and looked like it was just waiting to crack. Bought a tinted Lexan skylight from eztopsworldwide.com

We paid $8200 2 years ago, and yes, they spray right down to where the gutter is attached. So no more caulking there.

I seem to be having to replace the little on/off switch mounted on the water heater every year or so. The conne tor on the switch melts and the switch fails. But that doesn't explain why it doesn't work on propane either.

We had it done 2 years ago, so far so good.

The shop in York PA also has a shop in Newark Delaware, no sales tax, might save you some money there.

I had the same problem until I put screws in each end and it hasn't come out yet. My vertical seals have caulk in the side so they are caulked to the camper. Maybe try that on the ends.

Was there any Landmarks there?

My camper is 43 feet, it was $8k. I took the camper to York, PA, but now they have opened a shop in Newark, De.

I had the same issue and same choice from Dicor, but also had a choice of $2750.00 and new material. I gave the material away and had Flex Armor sprayed on.

Ours is a side by side, so we put 3 peices around the 2 handles.

We use the velcro straps also.

I have a whole house filter that I use, just leave the filter out, put the bleach in and screw the housing back onto the top.

ILH, would you mind explaining what the DC to DC charger is and the secondary cable is all about. Thanks.