Blazerjohn
Member
As we just got or Bighorn, I needed a hitch installed so I can pull my swivel wheel trailer and travel with my Yamaha grizzly. Also had the brakes inspected and the bearings repacked. During inspection of suspension, cracks in the welds on the spring hangers were decovered. Very sloppy welding done by Lippert. Some welds were so out of line where they only covered the hanger, but barely caught the frame. Kind of an important detail to overlook don’t you Think? I had the shocks replaced and the spring hangers cross braced. Also, I added a support from the bumper to that fits up against the bottom step on the ladder.
Attachments
-
9CBF45A2-A143-4745-874F-D47D69F2E9B4.jpg144.4 KB · Views: 211
-
8275CFF8-A694-4780-B99F-C8B5654B4C13.jpg101.7 KB · Views: 224
-
09486FAB-5652-4FA9-9050-070F25C36A96.jpg108.6 KB · Views: 232
-
25DA1C02-70CF-45BE-ABBE-F0330E3EAF5F.jpg94.8 KB · Views: 228
-
FE302B0F-4971-4956-B915-32792D6E3099.jpg80.4 KB · Views: 215
-
FE9CD1A3-527A-4896-BFFF-C7C08BF093C9.jpg121.4 KB · Views: 219