Hi all, new to this forum. Out here in Sweetwater TX picking up our new Cyclone 4006. First night after delivery hooked everything up at campground. Kept gray valves closed. After about 20 minutes we found the tub half full of water!
Opened gray and everything drained. Problem was hooked up to water and camper dial turned to “city fixture” water just continued to run through gray. Thought okay no problem, I’ll just fill fresh water tank and we will disconnect from city water and use pump. Turned to “fill tank” and it wouldn’t fill tank but just kept running right out of gray.
We are only camped 3/4 of a mile from our dealer so hoping they will send tech out. I suspect the selecter valve in the wet bay is either bad, or not plumbed right. We will see. Any ideas?
Opened gray and everything drained. Problem was hooked up to water and camper dial turned to “city fixture” water just continued to run through gray. Thought okay no problem, I’ll just fill fresh water tank and we will disconnect from city water and use pump. Turned to “fill tank” and it wouldn’t fill tank but just kept running right out of gray.
We are only camped 3/4 of a mile from our dealer so hoping they will send tech out. I suspect the selecter valve in the wet bay is either bad, or not plumbed right. We will see. Any ideas?