jpmorgan37
Well-known member
While doing a routine pre-trip check yesterday, I noticed that one backing plate was distorted is several places. I jacked the wheel up so that I could check the brake adjustment and found that part of the brake adjuster was laying loose inside the drum. I did check the other three wheels and the brake adjustment was good. I have the 3 3/4 x 12 1/4 brakes with never lube hubs and the nut to secure the bearings is torqued at 145 to 150 ft lbs so I left it alone. I'm waiting to hear what steps to take next since I am 463 miles from the closest Landmark dealer. I'll keep you all posted on what happens.
John
John