RSIG,
I am not at the house and will not be back until next week sometime, I can get a few pictures then. I can try to explain how I set it all up. I pull fuel from the bottom of the tank vs the top port, the I installed a inline fuel filter, the solenoid switch came NAPA as well as the fuel pump, one wire from a switch goes to the solenoid first and then to the fuel pump. I cut the overflow line in the main tank of the truck and put in a "T" fitting attached the line from the fuel pump and everything is good to go from there. The only change I would make and I still may do so is to install a shutoff valve in the line before the fuel filter so I can change the fuel filter without clamping it with vice grips.
Dave