Change code for keyless entry

SingerJC

Member
We have followed the directions for changing the code on our keyless entry. We have a 2011 Bighorn 3055. When we push the 9 button, it flashes, but does not stay on. So we are unable to change the code from the default "1,2,3,4" code.

Any ideas what we might be doing wrong? Thank you for any help.

Jim and Cathy Singer
 

2010augusta

Well-known member
Here is a quote from a factory rep from the last response on this topic:
The name of the lock manufacturer is Southco. I don't have the paper now, but we include a single page set of product details and instructions with each RV that is equipped with the system. Did you get this sheet with in your blue packet?

I suggest you phone Heartland Customer Service today at 877-262-8032 to discuss the issue.
 

SingerJC

Member
can't change code on keyless entry

We have a brand new 2011 Bighorn 3055, and are trying to change the code on the keyless entry. The instructions say to "press the 9-0 button for approximately 3 seconds. Keypad lights should flash twice then stay on." It flashes but the light doesn't stay on, and none of the rest of the commands will work.

Does anyone have any advice for us? We are new to all these new-fangled gadgets.
Thank you,
Jim and Cathy Singer
 

SingerJC

Member
We got it. Whew! Figured out that you have to put the numbers in before the light goes out. Hold the 9-0 key only 3 seconds, then put the rest of the string in. Thank you, Alan, for your help.
 
Top