2010augusta
Well-known member
today after seeing the slide floor de-lamination problem take several inches out of a slide floor, I decided to fix our unit before it started to get out of hand.
I went to HD and bought 2 10' sections of white roof edge flashing.
Came home and measured each slide edge and removed the screws holding the trim strip to the slide floor.
ran a bead of caulk on the bottom edge for the flashing and slid the flashing behind the trim and the wall board.
put the screws back into the trim and tighten them back and caulked the corners.
I went to HD and bought 2 10' sections of white roof edge flashing.
Came home and measured each slide edge and removed the screws holding the trim strip to the slide floor.
ran a bead of caulk on the bottom edge for the flashing and slid the flashing behind the trim and the wall board.
put the screws back into the trim and tighten them back and caulked the corners.
Attachments
Last edited: