I have a 2009 Razor 3612. On the way home from a race, something in the garage created a tear on the inside of the loading ramp / door. Now that it's torn, I can see that the materials consist of the outer sheet metal material, then a styrofoam material, followed by plywood, the a sandpaper (non slip) looking material that covers the entire ramp/door.
I'd like to know what you would do to repair the tear. I thought of filling the entire area with epoxy, then finding a similar sandpaper (non slip) material to lay over the repaired area.
An enhanced solution woud be greatly appreciated. If not, give me an idea of where and what to buy to replace the factory sandpaper / non slip material.
Thanks.
I'd like to know what you would do to repair the tear. I thought of filling the entire area with epoxy, then finding a similar sandpaper (non slip) material to lay over the repaired area.
An enhanced solution woud be greatly appreciated. If not, give me an idea of where and what to buy to replace the factory sandpaper / non slip material.
Thanks.