Anyone with pictures showing a dryer vent install on a bighorn 3670.

rvfool

Member
I've all the hookups in the bedroom cloest but wondering about cutting the hole for the vent. I guess the hole is suppose to be lower then the dryer outlet but how much lower.
 

grizzlygiant

Well-known member
The vent must be very close to the dryer vent. If it is off center, up or down or swideways, you will kink the connecting vent pipe and the dryer will not fit in the closit. I know by experience!!!
 

JohnDar

Prolifically Gabby Member
Attached is the installation guide for the Splendide 2100 combo W/D. You can see from the guide, which shows the vent is on the upper right rear of the appliance and the photo of my rig, that the vent comes straight out. In my floorplan, the W/D sits in the closet facing to the side, not to the rear like newer models. With the newer floorplan, I would guess that an elbow is necessary to run the vent out to the side.

View attachment 7852
 

SouthernNights

Past South Carolina Chapter Leader
It is interesting that the instructions tell you


"When locating in a towable trailer or watercraft,
position the machine over the axles or midship
where movement is at a minimum"



How many trailers have the W/D hookup over the axles?





 

JohnDar

Prolifically Gabby Member
It's kinda over the truck axles when I'm towing it. And I don't park it in an earthquake zone, so maybe it's OK.
 
Top