bluegrassthumper
Member
Okay, so I decided to remedy the pipe banging from the H2O PUMP. (3 days ago) I took out both panels, looked at all lines, decided some mods were needed. Went to Lowe's and got $32 worth of cup screws, anchors, ties, pipe insulation & hangers, etc. You can only get one arm and your head in the openings at a time. This will test your patience first.
Used the cable ties to snug the pipes in several locations (this took some creativity), then wrapped the pipes with 1/2" insulation turned on the pump and waited, then came bang,bang, bang.
So I crawl back under and try to locate the source while DW runs the pump, no luck still a lot of loud noise and vibration. After spending the afternoon trying to solving the problem, every thing is still laying where I left it. I spent the last two days pressure washing the 52' x12' canopy. Now considering replacing the pump with another model.
Guess I'll just crawl back in there and put everything back together. Maybe, I'll just camp where there will be water hook-up, or just live with the noise.
Any other suggestions??
Guess I'll read the book of Job again.
Used the cable ties to snug the pipes in several locations (this took some creativity), then wrapped the pipes with 1/2" insulation turned on the pump and waited, then came bang,bang, bang.
So I crawl back under and try to locate the source while DW runs the pump, no luck still a lot of loud noise and vibration. After spending the afternoon trying to solving the problem, every thing is still laying where I left it. I spent the last two days pressure washing the 52' x12' canopy. Now considering replacing the pump with another model.
Guess I'll just crawl back in there and put everything back together. Maybe, I'll just camp where there will be water hook-up, or just live with the noise.
Any other suggestions??
Guess I'll read the book of Job again.