12v lights

I came home tonight turned lights on in the off door slide (12v) DEAD checked the fuses, they were all good, the reading lightd and the overhead 12v are all dead. power at fuse panel ok, has any one else had this problem? any ideas where to start looking? thanks any help would be apreciated. Thanks jim thomas:confused:
 

branson4020

Icantre Member
Under the slide, you will see where the 12V wiring comes through a hole in the frame. It's just lying loose in the underbelly and it's spliced with a couple of wire nuts. If your lucky, and only one of the connections has corroded and broken, you can carefuly pull the wire out through the frame and repair the break. I replaced the wire nuts with the waterproof variety.
 
Top