Diamond Plate

Longshot1

Member
I need to put some Diamond Plate on the front of my 21FBS, Could you send me a picture or blueprint of the front under the front cover. Have a "v" hole in on the bottom in the middle. Thanks Marty
 

Bob&Patty

Founders of SoCal Chapter
Re: Dimond Plate

Marty, I can't answer your question because I don't own your model HL. I know you can by "plastic" diamond plate in sheets and cut to fit. A lot of toyhaulers have gone to this rather that REAL aluminum. It can be attached with construction adhesive and is very duriable. JM 2 cts
 

Longshot1

Member
Re: Dimond Plate

Marty, I can't answer your question because I don't own your model HL. I know you can by "plastic" diamond plate in sheets and cut to fit. A lot of toyhaulers have gone to this rather that REAL aluminum. It can be attached with construction adhesive and is very duriable. JM 2 cts

Sorry it took so long to say thanks for the info. Sounds good to me. I was still expecting a reply from the factory since this is the ask the facctory site. Once again thanks for you reply. Marty in Denver
 
Top