moving dollies

plumberdude

Well-known member

• Oct 31, 2010

• #1

Hello everyone,
Has anyone used a car dolly to move the cyclone triple axles around? The 88 deg. they talk about almost peals the back tire off on a hard surface.
Some places that you have to back into are on a hard surface.

pat

 

truknutt

Committed Member

• Nov 1, 2010

• #2

Not really sure what you're asking, Pat. Are you thinking of loading the back tires on a set of these?

Might be more work than you want it to be.

After you finish with them you could have some additional fun to justify having them with you: Movie

 

Attachments

• 
  car dollies.jpg

  3.2 KB · Views: 10

plumberdude

Well-known member

• Nov 1, 2010

• #3

hey dave,
being a rookie and not thinking it through this will not work. Though it would pivot better. About the movie
we have some young yahoos that use long boards on blind conners!! Flim at 11.
thanks
pat

 

H

hoefler

Well-known member

• Nov 2, 2010

• #4

A simpler and cheaper solution would be to buy a gallon bottle of dish soap and squirt it on the tire and ground to help it slide. Used to do this when on a wrecker trying to get a car away from the curb to hook to the other end.

 

GOTTOYS

Well-known member

• Nov 2, 2010

• #5

I doubt the moving dollies would support the weight. They would also be a pain to use. Try wetting the area to help the tires slip. Also if you can pull it straight ahead and back straight and short distance once you get it where you want it, this will take the stress off the tires and suspension. Only a few feet will help...Don

 

jmgratz

Original Owners Club Member

• Nov 3, 2010

• #6

Not just the Cyclone but all 5ers should be pulled forward and back in a straight line to take the stress off the axles and tires once in your spot.