We took our new 2011 305RW from Great Falls Montana to the Black Hills of South Dakota. Great trip and enjoyed our new trailer but below is a list of things we noticed during our first trip in our new trailer.
Graphic Decals peeling in multiple locations and cracked/broken decal on rear deck where decal was not put on smoothly and has ripples.
Slide out side of trailer, under floor storage area door. Front latch will lock but the post does not reach far enough into the hole to actually keep that side of the door closed. Other rear latch/lock does reach and keeps door closed during travel but would feel better if both worked properly.
Screen Door on Main Door not alligned with door frame and sticks closed. Must lift up slightly to get it to open freely. Main door works fine but will not open together with the scrfeen door.
Most water fixtures loose and leaked. Required tightening. Shower handel and shower head hose panel not sealed at all. Water can get behind shower wall at panel location.
Rain gutter on main door side of trailer not sealed/rtved between sections causing water to drain at each joint which happen to be over window locations. Other side of trailer is finished correctly and does not leak where it is not supposed to.
Landing gear spring loaded pin on main door side of trailer does align well with hole and must be pushed into the locked position. I can force it through but the wife is not strong enought to get it to go all the way through and be secure.
Living room main slide out area, Main big window shade string guide for shade at bottom achore is stripped out and pulling out of the wall.
Again we love our new trailer just wanted to point out a few things that seem to be fit and finish issues with factory Quality Assurance
I plan on going through the other lines below to check all of them and the water pump as it seems to be loud due to vibrations while running.
Graphic Decals peeling in multiple locations and cracked/broken decal on rear deck where decal was not put on smoothly and has ripples.
Slide out side of trailer, under floor storage area door. Front latch will lock but the post does not reach far enough into the hole to actually keep that side of the door closed. Other rear latch/lock does reach and keeps door closed during travel but would feel better if both worked properly.
Screen Door on Main Door not alligned with door frame and sticks closed. Must lift up slightly to get it to open freely. Main door works fine but will not open together with the scrfeen door.
Most water fixtures loose and leaked. Required tightening. Shower handel and shower head hose panel not sealed at all. Water can get behind shower wall at panel location.
Rain gutter on main door side of trailer not sealed/rtved between sections causing water to drain at each joint which happen to be over window locations. Other side of trailer is finished correctly and does not leak where it is not supposed to.
Landing gear spring loaded pin on main door side of trailer does align well with hole and must be pushed into the locked position. I can force it through but the wife is not strong enought to get it to go all the way through and be secure.
Living room main slide out area, Main big window shade string guide for shade at bottom achore is stripped out and pulling out of the wall.
Again we love our new trailer just wanted to point out a few things that seem to be fit and finish issues with factory Quality Assurance
I plan on going through the other lines below to check all of them and the water pump as it seems to be loud due to vibrations while running.