Water Heater not attached to coach

Jett

Active Member
Just something you might want to check on the line:

When I arrived at the campground this weekend, I noticed a 1/2 inch gap between my water heater and the outside wall of the my 3210. I could easily move the water heater in and out approximately 1 inch. When I removed the water heater outer flange, I discovered that someone had failed to install any screws to secure the water heater to the wall.
 

trdeal

Past North Carolina Chapter Leader
Had the same problem with our 2005 Mt. Rushmore last season. Installed some screws and caulked around the opening and all is well.
 

Jett

Active Member
Not hard to fix -- but -- shouldn't have happened in the first place. Makes me wonder if screws were left out in other places.

Jett
 
Top