SilverRhino
Well-known member
While performing a modification in the kitchen base cabinet of our BC 3250, I discovered a length of 14-2 Romex wire (See Photos ) that is not connected to anything, at least on one end. I could not find the other end of the wire.
The cabinet that was being worked in was the far right base cabinet, the one closest to the door. This cabinet has a false back in it and has the circuit panels mounted in it's side. I was unable to get far enough into this small cabinet to see where the other end of the wire went.
When I checked with a meter, the wire was not hot. I was wondering if HL uses a "standard" wire loom and this particular run was not used on my model.
I thought I would ask for assistance here, since I am unable to call at this time. We are in the mountains in Colorado, No phone service but we do have internet. I do not want to do a final installation of the back of the cabinet until I find out what this wire is for.
The cabinet that was being worked in was the far right base cabinet, the one closest to the door. This cabinet has a false back in it and has the circuit panels mounted in it's side. I was unable to get far enough into this small cabinet to see where the other end of the wire went.
When I checked with a meter, the wire was not hot. I was wondering if HL uses a "standard" wire loom and this particular run was not used on my model.
I thought I would ask for assistance here, since I am unable to call at this time. We are in the mountains in Colorado, No phone service but we do have internet. I do not want to do a final installation of the back of the cabinet until I find out what this wire is for.