SJH
Past Washington Chapter Leaders
In another thread members were discussing the apparent delamination or separation of the overhang cover (bulkhead) of their rigs. I posted how I didn't think mine was caused by water intrusion although since the storage area is basically open to the elements it is possible but I don't see water in this area.
Since these things tend to bug the crap out of me...I decided to investigate a little further today after work. My wrinkles are pretty much only in the front part of the storage area at the bottom (see photo) The top has a few imperfections but nothing out of the ordinary. After I looked, examined, pushed and poked, I believe I found the culprit! There is a broken weld in the bulkhead frame (storage door frame).
Hopefully this is the issue. I don't think i will bother trying to find an aluminum welder but rather fix it with an L bracket and some pop rivets! If it doesn't secure it I will pursue the weld fix!
Since these things tend to bug the crap out of me...I decided to investigate a little further today after work. My wrinkles are pretty much only in the front part of the storage area at the bottom (see photo) The top has a few imperfections but nothing out of the ordinary. After I looked, examined, pushed and poked, I believe I found the culprit! There is a broken weld in the bulkhead frame (storage door frame).
Hopefully this is the issue. I don't think i will bother trying to find an aluminum welder but rather fix it with an L bracket and some pop rivets! If it doesn't secure it I will pursue the weld fix!