Water Pump location on Cyclone 4012

I puchased a cyclone 4012 5th wheel this spring. It has come time to winterize it up here in Alaska and I cannot locate the water pump. I am getting ready to start unscrewing panels, but am hoping someone here can point me in the right direction before I start tearing into it.
 

cookie

Administrator
Staff member
Welcome to the forum. You are headed in the right direction. Remove the panels and you will find it back there. But if you have the UDC with the bypass valves and the winterizing hose you will not need to access the water pump.

Peace
Dave
 

truknutt

Committed Member
Cookie is correct. After bypassing your hot water heater and draining your ice maker line (if you have one), flip the "Winterize/Normal" lever in your Docking Center. There should already be a clear hose attached so you can drop it into your anti-freeze jug(S). Next to your lever should be a switch to remotely operate your water pump and cause it to draw from the jug. There's a lot of plumbing in that 4012 so have plenty of the "pink stuff" ready.
 
Top