Bighorn 3055 RL and Dodge 4x4

chardel

Active Member
Is the Bighorn 3055 RL in the standard configuration as it comes from the factory set up to be pulled level by a dodge 4x4 or is there some changes that need to be made -- by the factory when being built? -- by the dealer at delivery? --- not at all? And, if so what needs to be done? I have seen lots of discussions in various forums about "axles needing to be flipped" to be pulled by a 4x4 and have been concerned if it needs to be taken into consideration when initially being constructed.


Question will be answered by users. Moved thread out of ATF and into Towing Rigs.
Admin
 

dieselengineer

Charter Member
Can not talk directly about the 3055rl model, however for the 3400rl model with a Dodge 3500 SRW, 4x4 were is no problem in ride height. In stock setup, I have about 8 inches between the bed rails and the coach is riding dead level.
 

phranc

Well-known member
I too have a dodge 4x4 (04) and had the same concerns before we bought the 'horn'.. Even hooked up to another unit in transit to satisfy my concerns.
All have turned out to be a non-issue.. the 3600 rides dead level and I have
6-8 in bed rail clearance..
 
Top