Installed the Jack head on my mast and I think it improved the signal but.... it loses signal completely. Pulled down the crank and cover and can see a connection through the hole. If I wiggle it my signal comes back. Tried to pull out a speaker to get at it but no go. My question: I have a Greystone 32Re. Antenna in the bedroom with a tv outlet. Main tv with the signal boost in the other end. If I remove the mast from the top of the trailer can I pull the cable out through the mast hole and get at the splice or do I encounter a 'tee' that feeds the bedroom TV and my work is for naught? There's a lot of sealant, etc. that has to be removed to do this so any other ideas would be appreciated. Is there enough slack in the cable to pull out 18" to 2'? Has anyone done this?
Thanks,
Jeff
Thanks,
Jeff