R & R day night shades ???

We have an 09 Bighorn 3370, we need to remove the blind on the small window on the left side of the couch. If I could remove the boxed in valance around the blind I could get to it, any ideas how to proceed?
Thanks

Its just screwed in with #2 square screws, but its real hard to find the heads.

jnbhobe said:

Its just screwed in with #2 square screws, but its real hard to find the heads.

Click to expand...

Probe around in the fabric in the corners of the top valance and the lambroquins (side valances). The screws are buried in the fabric folds. There is probably another screw near the bottom of the side valances, too.

The screws are normally into the cloth of the valance. Just pull out gently and watch were the cloth stretches and then open up an area in the cloth to get to the head of the screw. On the top there should be two or three screws and you should be able to find them fairly easily..

We didn't like the day/night shades so we replaced them with 2" wooden venetian blinds. The inside can get quite dark compared with the day/night shades.

FWIW
BC