wiredawgchief
Active Member
Fellow Cycloners, I purchased the Turbo Flush from Camping World for about $30. Still needed to buy additional water line and some splice connections at Home Depot as the short tubing the kit provides is not nearly long enough. I unscrewed several screws holding the belly underpinning up and rolled back. I followed instructions in kit which involved drilling 1 1/4 " hole at end of tank 2" from top and centered. The rest is pretty easy. I mounted the filler. One important note...you must use a water pressure regulator on this unit... I have several. There is one discrepancy in my picture of the tank connection... the black vacuum relief fitting doesn't go on at the tank...It screws into the tank filler, then the regulator into it then the hose into it. Here are the pics: I had two little helpers as well. next big project is installing a small ice machine in the RV. Cheers, Ron