Torque 325 water heater bypass

danemayer

Well-known member
Hi wa5zjk,

I'm not familiar with the Torque layout, but you probably have an arrangement like this with 3 valves located on the inside side of the water heater. If you locate the water heater on the outside of the trailer, there's probably an access panel on the other side of it so you can reach the valves. This picture is from a different model where the access panel is on the interior, a bit higher than the water heater.

.mpg water heater valves notated.jpg
 

ILH

Well-known member
Hi wa5zjk,

Your floor plan is a bit different than mine, but I imagine that Heartland would have some consistency. On my rig the basement wall alongside the UCC is removable with just a few screws. It will give you access to the plumbing behind the water heater. Hopefully yours isn't too different.
 

TravisJen

Active Member
On our Torque 321, we had to remove the wall in the basement and access the bypass valves on the off-door side. There are 3 coming off the side of the hot water heater.
 
Top