Installing Dining table LED dimmer

Purchased Mini LED Controller Dimmer with RF Wireless Remote Control DC 5~24V 12A R106 to install in place of the OEM on/off switch on a 2014 Big Horn 3070. When I pulled the existing switch out I have different wiring than on the remote capsule. My question: which color wire on the capsule goes to what color wire in the trailer ? See the attached pictures for a better idea of what I'm blundering through trying to explain. Thanks

Red wires are usually your hot leg and white is your neutral. If you have a 12volt lighted tester (used in auto shops to test 12 volt looks like ice pick with lighted handle) confirm hot lead and connect that to the red on the dimmer. You can also use any voltmeter set it to DCV and test red lead from voltmeter to red camper leads and ground to frame or any metal.

Red to red, black to white


Andy

Yep, black to white, missed that. But if possible confirm your hot leg to switch and confirm it is the red/white line.