LED Light

jimtoo

Moderator
Hi bullenv,

Welcome to the Heartland Owners Forum and to the family. We have a great bunch of folks here with lots of information and all willing to share their knowledge when needed.

Hopefully one of our family members will jump in soon with some help for you. I think that is one of those that require some tugging and pushing and maybe even a little twisting. :)

We do have a very good search engine on the forum where you can search for others that have had the same problem and have posted the fix.

Enjoy the forum.

Jim M

moved thread to better area also.
 

cookie

Administrator
Staff member
What year is your Sundance?
Normally for LED replacement you will need to turn the lens counter clockwise. Unscrew it.
Then the fixture will be held in place by three screws.

Peace
Dave
 

cookie

Administrator
Staff member
I really don't think that you have LED lighting in your 2012 Sundance.
If you can grab the lens and pull down you should be able to see two mousetrap style springs that hold the fixture in place.
If it pulls down you have the Halogen lighting.
If it doesn't pull down then you may have the LED.
If you have Halogen you will see one bulb.
If you have LED you will see a flat card with about 15 LED's on it.
Either way you need to unscrew the lens from the fixture.

Peace
Dave
 

donr827

Well-known member
OK. Thanks. It just seems hard to twist off. Afraid we might break it. We'll give it a try.
J had one like that. After a lot of pressure it finally came loose. If you pull the light down a little you can get a better grip.
Don
 
Top