Atwood Wedgewood Vision 3 burner stove

bigdob24

Well-known member
We have an Atwood Wedgewood Vision 3 Burner Stove - Oven and the oven does not heat up to temp very well and cooks uneven.
Any adjustment to the burner to help this oven out?
The top burners work very well, just the oven has problems.
Anyone have any luck fixing one of these?
Dan
 

danemayer

Well-known member
Troubleshooting:
OVEN COOKS UNEVENLY AND/OR FOOD BURNS ON THE BOTTOM
- Poor oven ventilation ---Oven too full for proper circulation - must have 1” clearance in all directions.
- Ventilation holes in oven bottom (shelf above burner) are covered. Check the top vent (on back of range) it must be clear of all insulation, etc.
- Problem thermostat ----Replace thermostat.
- Oven not preheated ----Oven must be preheated at least 10 minutes.
- Thermo bulb out of position --Thermobulb must be in clip on back of oven - pans cannot touch thermo bulb.
 

Westwind

Well-known member
My wife used ours today to cook cookies, she uses a independent oven thermostat rather then the ovens and it seems to work well. We have a 2012 Bighorn.
It is a pain to light since we are not comfortable leaving the pilot on we light it each time we use it. Other then that it makes a nice bread box.
 

bigdob24

Well-known member
I have figured out that it just takes at least 20 min to heat up to 400

The thermo bulb is in the proper spot and everything is clean and clear.

Just have to adjust cooking time

Thanks for the info

Dan
 
Top