Mounting a TV

I want to mount a 32 in TV over the walk through exit door in the garage of a Torque 380. This will be mounted on the inside of the outer wall. I have found the metal studs and cut a 32 x 26 board the mount the TV mounting brackets to. My question is; what is the best screws\bolts to use to mount the board to the wall with? I know that the screws\bolts cannot be over 1 1/2 inch and they have to be metal to go into the studs, but what can I use to be sure the TV stays on the wall, while moving\towing and not damage the RV structure?
Thanks for any help you may offer.
Ray
 

Mandlit

Member
Hi we are also new owners and I used a board applied a No Nails glue to back and screwed solid with self tapping drywall screws for metal studs. The screws can be purchased at most hardware stores. Enjoy your adventure.
 

Bohemian

Well-known member
The studs are Aluminum. If you use any uncoated metal you will set up an electrochemical cell and cause corrosion. I would think about using coated deck screws. If I knew of something better I would use that.
 
Top