Wedgwood Vision oven

dericc

Member
I have a Newport 43" LandMark with a Wedgwood Vision Oven.
1. two back burners only light if manually lit, cannot lite them with lighter on oven
2. oven is 100 degrees off, if I want to bake at 400 degrees I have to set oven at 400.

any suggestions on what to do with either

Thank you
De Ricci
 

danemayer

Well-known member
Hi dericc,

Welcome to the posting side of the Heartland Owners Forum.

Atwood says:
THERMOSTAT CALIBRATION
The ideal temperature variance is 25 degrees (plus or minus). This means that if the thermostat is set at 350 degrees, the
temperature will range between 325 and 375. If the temperature exceeds 50 degrees, plus or minus, check for a kinked capillary tube.

As for lighting the 2 rear burners on top, I'd lift off the top and see if there are igniter wires going to the rear burners and if the wires look like they're in place.
 
Top