PDA

View Full Version : Missing screws or NOT?



creeper
04-28-2008, 10:38 PM
Was putting in second battery and noticed the front lower cap is not attached to the frame. There are holes in the frame, but no screws. I was wondering if that's the way it's supposed to be or did they forget.

Screw holes are on the other side of these arrows.

http://creeperscobra.com/drop/front.jpg

These arrows point to actual screw holes.

http://creeperscobra.com/drop/inside.jpg

caddojay
04-28-2008, 11:11 PM
YIKES, I looked at ours, and we have screws. But, we also have a generator there. I think the screws are about 1" and self-tapping. I'd hate to have it flapping in the breeze on the highway.

sailorand
04-29-2008, 08:44 AM
Creeper
I just put in a bunch of screws into mine. #8 is what is used. I had the whole front moving 1/4 inch. Just remove the screw cover strip that covers the screws and put more in. The vertical part of the front only had 5 screws in where there was room for 12 on each side. Economy?? or sloppy workmanship??

creeper
04-29-2008, 10:25 AM
Thanks, would like to hear from the factory on it. Was wondering if they left the screws out to allow movement.