Any Way to Adjust Factory Steps

Had a step recall done - we received a letter having us return to the dealer because some of the rivets used in construction could come out. Regardless, the recall was done and when the steps were put back on the coach they now slope down from the back to the front of each step. We don't remember them doing that before - it is quite disconcerting to the DW. So, my question, is there some type of adjustment that can be made to perhaps tilt the whole assembly back to level? Thanks in advance.

You might be able to just loosen the 4 side mounting bolts and lift up or jack up the outer side and then tighten them back up
That should do the trick

Hope this helps
Jerrod


Sent from my XT1585 using Tapatalk