When i parked the trailer for the first time, I had just put a level inside the door and used that as a guide to level the trailer. I didnt have much time to tinker at that time as i pretty much had to drop it off and go (had rented a truck to deliver the trailer and had to head back right away). This was the first weekend that we had the slides open and had a chance to use the trailer. Seeing that i had used a level just inside to the door to level, it actually was way out of level. Its almost like that area of the floor has a crown in it. When we walked to the bunk the room, we really noticed how unlevel the entire unit was. Needless to say I had a pretty horrible sleep as the trailer was way too low on the left side. I was able to borrow a jack from a neighbour and removed the blocks under the tires from the right side and actually had to put them on the left side. This time i put the level on kitchen counter. it took a little tinkering but i was able to get it pretty level. but now as i said before, when you walk between the fridge and island, it really feels low. I put my level on this part of the floor and it is low towards the outter wall. The rest of the trailer feels ok, just this one area is where we can really notice it. I had also put my level on the rear bumper and hitch pin and its level in both locations.
Not too sure what to think now, how can there be a crown in the floor? Everything seems square...
thanks all