Pocket door stuck

RawFaith

Active Member
For some unknown reason the pocket door in our unit will not cooperate in any way.

It’s in the “open” or “hidden” position, and will not slide to close it.

Looking with a flashlight we can’t see anything that can be causing an issue.

How in the world do we get to remove this door/tracks to get it working?

2005 Landmark Grand Canyon.

Gracias in advance and Feliz 5 de mayo!!!

6a09b71b5b3521ab8603fa801f66f36c.jpg



af53710c53cdddfef83f6a0ad748ae3a.jpg



Sent from my iPhone using Tapatalk
 

Garypowell

Well-known member
On my previous rig (2008 vintage) the door fell off the track. There was a screw that was placed vertically in the track at the far end to prevent this from happening but it fell out.

What I recall doing was screwing a large screw in the top part of the door used to pull on while someone else pushed in at the bottom of the door to raise the rollers on the far side back up to the track.

once the roller is engaged you pull on the upper screw to move the door towards the closed position.....

sounds easy right.....it took a while....

after the the door was on the track I drilled a hole through the frame, the door, and the other side when it was in the open position. Anytime the door was opened it was pinned in place. Especially when traveling.
 
Top