ALF
Former Georgia Chapter Leaders
Mod: Added Lights to MORryde Steps
Goal
Light up entry steps after adding MORryde storage box.
Process Summary
Installed 4 LED blue lights above each stair tread.
Parts used
Process Details
Note: Be sure to unplug cord when storing steps.
The reason I did it this way is so that there is no cord to get pinched when storing or bringing steps down.
Goal
Light up entry steps after adding MORryde storage box.
Process Summary
Installed 4 LED blue lights above each stair tread.
Parts used
- 4x RV Marine Boat Trailer Led Blue Oblong Courtesy Light 3" SS Trim Black Finish, Marine LED Oblong Courtesy Lights, 3"by1.25" SS Rim - 1 required
- BatteryMINDer EZC-01 Universal Flush-Mountable EZ Connector - with 4 Mounting Screws - 2 required
- West Florida Components 2 Pin Quick Disconnect Wire Harness SAE Connector Bullet Lead Cable (12 AWG) - 1 required
Process Details
- Drill hole above each tread (lights determine size of hole)
- Connect wires from all 4 lights together
- Drill hole on the outside of steps for EZ Connector
- Connect lights to EZ Connector
- Drill in RV skirting for 2nd EZ Connector
- Connect to power as you prefer (Coming Soon - I will be installing a switch just inside RV door towards floor)
- Connect 2 Pin Disconnect cord between the 2 EZ Connectors
Note: Be sure to unplug cord when storing steps.
The reason I did it this way is so that there is no cord to get pinched when storing or bringing steps down.
