mlburst1
Well-known member
The plastic end caps on the Kemberly/Atwood ladder on my 2010 Sundance had cracked on three rungs, making the ladder unsafe to use.
After searching online, I found that Atwood sold the “rights” to the ladder to Advanced Resourcing Sales.
The end caps were redesigned - one center hole and the two outsides holes were eliminated.
The countersink on the center hole was also changed to a flat seat for the screw, eliminating the stress that results when the countersunk screw was adjusted too tightly causing the end cap to crack.
The newly designed end caps can be purchased for $0.99 each plus shipping.
I bought 12 and replaced all of the plastic end caps on the ladder.
Website for ordering is https://advancedresourcingsales.com/products/cap-step-end
After searching online, I found that Atwood sold the “rights” to the ladder to Advanced Resourcing Sales.
The end caps were redesigned - one center hole and the two outsides holes were eliminated.
The countersink on the center hole was also changed to a flat seat for the screw, eliminating the stress that results when the countersunk screw was adjusted too tightly causing the end cap to crack.
The newly designed end caps can be purchased for $0.99 each plus shipping.
I bought 12 and replaced all of the plastic end caps on the ladder.
Website for ordering is https://advancedresourcingsales.com/products/cap-step-end
Last edited by a moderator:
