I just got mine back from Camping World and they forgot to install the inner slide seals. Like BigJim mentioned, it took about a month to get it back. I asked them just to order some more seal material and I would put them in. I have looked ever where and can’t findable video showing how to install this style, but after pulling my inner seals off today I think it will be straight forward. The seals just push into place, no adhesive and the shape of the portion that gets pressed in makes it difficult to back out. See pictures attached. To get the inner ones out you have to remove the bracket with 3-4 screws that holds the wiper to the bottom of the trailer accessible from the outside of the rig with the slide open (picture of the bracket after removal attached). I bent the bottom portion of the retainer slightly to begin pulling out the wiper. It may be easier to start from the top, but it worked from the bottom. The outer seal looks like it would be the same, but with out the brackets, just pry open the retainer slightly and start pulling the wiper out. It looks like you simply press the new wipers in place, squeeze down on the retainer and re attached the brackets. I’ll let you know how it goes when I get a hold of some wipers. I can’t find anyone online who sells this design wiper, the factory might be the only option. Let me know if you find them online some where.
View attachment 63526View attachment 63527View attachment 63528