Question about Three Seasons Door in 2020 Cyclone 4007

We are looking to purchase a 2020 Cyclone 4007. This states it has a 13' garage but in reality with the ramp fence and Three Seasons Wall, which are awesome options, it reduces the actual length to about 12'. We need at least 12'6" for our RZR so that is why we were excited about the 13' garage. Question is - how hard is the Three Seasons Wall to take out and put in? It appears there are 2 spots at the top that just has 2 screws each that will allow the door to come in and out. Is this correct or is it way more involved than that?

Thank you in advance for any input! :)
 

Flick

Well-known member
We are looking to purchase a 2020 Cyclone 4007. This states it has a 13' garage but in reality with the ramp fence and Three Seasons Wall, which are awesome options, it reduces the actual length to about 12'. We need at least 12'6" for our RZR so that is why we were excited about the 13' garage. Question is - how hard is the Three Seasons Wall to take out and put in? It appears there are 2 spots at the top that just has 2 screws each that will allow the door to come in and out. Is this correct or is it way more involved than that?

Thank you n advance for any input! :)
Ok. I went to measure. If you want exacts the 4 season door extends out 8”. However, it has flexibility. You could fit a 12’6” RZR in the space. If you just unlatch the top of each side you gain a little more, probably 2”. Tight,yes. But it would fit. Good luck. And by the way, the railing and the 4 season door are nice if you ever get a chance to use them.
 

Cornholeo

Member
We are looking to purchase a 2020 Cyclone 4007. This states it has a 13' garage but in reality with the ramp fence and Three Seasons Wall, which are awesome options, it reduces the actual length to about 12'. We need at least 12'6" for our RZR so that is why we were excited about the 13' garage. Question is - how hard is the Three Seasons Wall to take out and put in? It appears there are 2 spots at the top that just has 2 screws each that will allow the door to come in and out. Is this correct or is it way more involved than that?

Thank you in advance for any input! :)

We just purchased a 4007 and have the same plans on a RZR XP 4 seater. How did this work out for you? I will start looking closer at the mounts and measurements. Hoping to get that particular SxS in there!
 
Top