Attwood oven

danemayer

Well-known member
Here are 2 that might help.

If the temp is 50 degrees low, and it used to work ok, you might start by checking propane flow. If you have poor propane flow, you can't fix that at the oven. You want 11 column inches of gas pressure where propane comes into the range, as measured on a manometer.

I'm not sure, but if you remove the oven temperature knob, you might find a setscrew inside the shaft that adjusts gas flow.

If that doesn't pan out, replacing the thermostat might be a step forward.

And of course, anytime working with propane, care is required to avoid serious risks.
 
Top