LBR
Well-known member
Hello fellow Residential Refrigerator owners.
If you're like me, after taking delivery of your trailers and driving the nation's roads, you may have noticed the bottom of your fully loaded fridge trying to bounce away from the back wall. IMO the factory placed just enough holding power for the destination delivery....ours had 2 screws that eventually ripped out of the wood floor.
So after looking at the 2 front legs hanging out in mid air doing nothing, I removed the bottom screw-in adjusting feet. "How to tie these legs back to the refer flooring?"...the light bulb then lit.
This was my approach to lift and support the front and also to assure it not to move into the galley at it's own free will....killed 2 birds with 1 support.
Measure. Cut. Weld. Grind. Drill. Beadblast. Prep. Paint. Attach. Photos should step anyone thru the idea process to modify for your own unique applications.
If you're like me, after taking delivery of your trailers and driving the nation's roads, you may have noticed the bottom of your fully loaded fridge trying to bounce away from the back wall. IMO the factory placed just enough holding power for the destination delivery....ours had 2 screws that eventually ripped out of the wood floor.
So after looking at the 2 front legs hanging out in mid air doing nothing, I removed the bottom screw-in adjusting feet. "How to tie these legs back to the refer flooring?"...the light bulb then lit.
This was my approach to lift and support the front and also to assure it not to move into the galley at it's own free will....killed 2 birds with 1 support.
Measure. Cut. Weld. Grind. Drill. Beadblast. Prep. Paint. Attach. Photos should step anyone thru the idea process to modify for your own unique applications.
