shower door Flipped!!!!!
Tom, It's fast and easy. I stood inside the shower & removed 5 screws from each side of the door. Then remove 3 small screws from the top rail. Step out of the shower & lock the door lift up the header just to clear the top of the door gently pullout on the top of the door and lift it up & out. turn the door over & replace.put the screws backin the door sides I started in the middle then next up & down one side then the other. Then the small screws in the header you will need a drill or a cordless for the one by the door as the hole is gone from flipping the door there self drilling screws so its no biggie. I also resiliconed the entire frame of the shower if you lay on the floor & look where the track & Base meet there is a pretty large gap I could see right thru mine so I did inside & outside both. worked GREAT
You can open the door completely with the curtain closed.
Completed in less then 1 Hour.
Tools needed, Philips screwdriver,Cordless drill,Tube of 100%silicone.Caulk-gun.
Rob