I did figure out the Satelite. Once you connect the Dish to the port in the outside docking station, its time to go inside. In the small cubby below and left of the tv you will find the video jacks. The top one connects Cable and Antenna. The bottom one is the satelite. Disconnect the cable from the video jack and slip it back up through the countertop hole. Then connect it to the out to tv antenna/cable jack on your receiver. Use a second cable attached to the antenna/cable jack in the cubby and attach it to the antenna/cable in jack on the receiver. The final cable runs from the satelite in jack on the receiver down to the b ottom jack of the labled satelite in the cubby. I needed a flashlite to read the info on the jack. There was no information provided by the dealer or the factory on how to do this. In fact I was not provided with any infor on the TV. Now for the question of how to remove the
TV> That is still a mystry as there was not a long allen in the owners manual and the dealership just offer generic thoughts on how some wall mounts function.