Recent content by Kylesusan

  1. K

    Wilderness RV Mattress

    Do you have a King or Queen platform? I'm wondering if a Queen size wouldn't fit that space better?....I just went with an RV Short King because the old mattress was a King......there's not a lot of room to get on either side of the bed and the slide where the head of the bed is, is pretty...
  2. K

    Wilderness RV Mattress

    If you're thinking about buying a Wilderness RV Mattress for your RV bed......DON'T! We purchased ours and immediately had issues with it. The middle of the mattress was sunk in so badly it felt like our feet were elevated. I thought it was just that the bed hadn't completely come to shape...
  3. K

    Hot air blowing thru kitchen vent

    Dave Thank you! I was wondering if I could do that! Thanks for the info! Regards Susan
  4. K

    Hot air blowing thru kitchen vent

    I have a 2016 Hartland Elkridge 40F LFS I have a large vent on the wall in the kitchen under my cabinet that is between the living area and the kitchen. I noticed during the summer when the wind blows a lot of hot air blows through that vent across the floor. Everything is turned off on my...
  5. K

    Windows in my 2016 Elkridge 40FLFS won't open

    Will definitely try this.....entirely possible as the people we bought it from never raised or opened the windows.....the seal on the emergency exit window was stuck when I first opened it so it's definitely possible....Thanks for the suggestion!
  6. K

    Windows in my 2016 Elkridge 40FLFS won't open

    They're not stuck at that spot as they raise past that point then stop.....it's so strange.....I've tried backing the screws out of the frames inside and out but not joy!....I think I'll try running a putty knife down the frame inside and out where it touches that window and see that seal is...
  7. K

    Windows in my 2016 Elkridge 40FLFS won't open

    I've already used that, as noted in my original post.....didn't help at all.....it's as if there's something stopping the window from raising at all.....
  8. K

    Windows in my 2016 Elkridge 40FLFS won't open

    Tabs move easily.....all tracks are clean.....it's almost like there's a stop in the window frame keeping it from going up.....
  9. K

    Windows in my 2016 Elkridge 40FLFS won't open

    I'm aware, but not where mine's located....and I've seen some of the prices for the calls....just hoping there's an easy fix that I won't need a repair person
  10. K

    Windows in my 2016 Elkridge 40FLFS won't open

    The couple who owned it before me never opened the windows.....there's no paint or sealant (used phone camera to zoom in).....I don't want to have to haul it to a service place (it's 40+ ft)......hoping someone can give me an idea so I'm not forcing the windows open (I'm worried I may tear...
  11. K

    Windows in my 2016 Elkridge 40FLFS won't open

    Hey y'all! Hoping someone can help....I've been trying to open my windows in my 2016 Elkridge and they seem to be jammed (I did get a couple of them open but only after forcing them up)....I've tried backing the screws out of the interior and exterior frames, I've used the window silicone to...
  12. K

    3 Panel Shower Door reinstall

    So great news! We got the shower doors back on.....after quite a bit of trial and error.....we found that you have to put the roller on the inside of one end and where the next panel connects the roller goes on the outside, and so on......after we figured it out and found new clips (from a...
  13. K

    3 Panel Shower Door reinstall

    Thanks for the info, but am not sure what that has to do with reinstalling the shower doors.....did I miss something? I do actually have a leak in our gray water tank, but we know where that is and how to repair/replace.....it's almost like you read my mind on that one as I had thought about...
  14. K

    3 Panel Shower Door reinstall

    Hubby & I bought a 2016 Heartland Elkridge 40FL.....the previous owner removed the 3 panel shower door and we'd like to reinstall it. We have the doors but we think we are missing parts! Does anyone know of a schematic or video that shows how to install these so we can see what we are missing...
Top