Recent content by Marguerite

I haven't seen discussion of this - maybe I'm in the wrong place. We want to buy property to park our RV and build a small cabin... We have other requirements (major bike trail, mature trees) but there is no sense looking where you are not allowed to live in an RV or at least park it for...

Sundance repeated blowouts. We have owned our Sundance about 4 years and have had 4 FOUR! blowouts. 2 went at once (right rear took right fwd with it), then this trip blew right rear and then 200 miles later left rear... so both side panels are now out and we are fed up with blowouts. So now we...

Good find Florida Randy. PS sounds like we have similar rigs -where are you located in FL?

Re: Help - Underbelly leak - need schematic Thank you very much for the reply. We didn't see any screws holding the cross members on - on the sundance 2800 the supports run crosswise and it must be the front one which we couldn't really see. We just looked at the back one which is visible and...

Has anyone replaced a water tank on a sundance? Ours sits on L-braces that are welded in place, so it would probably have to come out from above. How difficult is this? Thanks for information.

Re: Help - Underbelly leak - need schematic maybe I wasn't clear - the way the tank is installed it can NOT be removed from the bottom and a new one cannot be installed that way - we would have to rip the entire floor apart... it's just plain bad design...

Re: Help - Underbelly leak - need schematic The issue of course is not the price of the tank but tearing the entire trailer apart as I explained it would have to be replaced form above. This is not a viable option so that's why I requested permission to post in another thread rather than...

How to Replace water tank outflow fitting? who makes the tank & of what??? We've been struggling with a leak in our water system.... took down the entire underbelly and isolated the leak - where the tube to the waterpump connects to the tank (on the port rear bottom of the tank) there is a...

Re: Help - Underbelly leak - need schematic thanks Dave and Mr. Goodtruck. I called the factory and got no help so I'm back here. We took the entire underbelly off by cutting it in sections. We found the problem - it is at the fitting where the pump takes water out of the water tank - it is...

Re: Help - Underbelly leak - need schematic Thanks - does anyone know where we can get a schematic? He cut the front part off but that is not where the leak is. thanks.

OK, it appears the edge of the bottom panel is glued. I think we want to loosen it all around, drop it and then cut the panel in sections (being careful as you warn about hitting other things) (not today - another day). If we pull it down, do we need to reglue it? Is there anything that will...

Hello, we had our Sundance stored for a year. It rarely freezes here in Florida, but may have touched freeaing while we were away last winter. anyway - when we filled it for the first time yesterday - all the water ran into the underbelly. Where do we even start?? We drilled holes to let it...

hmm. well - we may have blown out the water lines, but not in a GOOD way... We are in Florida and it rarely freezes, and we didn't take the required precautions. but it might have hit freezing a few days while we were away last winter... anyway we are using it for the first time and guess...

Re: Discussion Just getting reactivated in the forums. Interested in meeting people in Florida and especially people who like to bike.

Hello Mickey and Bonnie, Thanks for sending the private message. I replied to that message but I guess those replies don't show up anywhere. We are delighted to know about the Florida Chapter. We have taken our Sundance all ove the country and are now doing some local Florida camping. We are...