Recent content by Ray55

I had a new axle installed by Fleet Maint. of Texas, loated in Austin Texas, now have a few hundred miles on it and it appears to have solved my problems. Old axle had a slight bend in it near the right end of it. Very close to the right rear tire. This is the hub taht completly failed and...

I noticed unusuall wear on the back tires. Took it to the dealer to have axles, hubs checked they said it all checked out ok. Put on new tires. Now am sitting waiting on a tow truck to take me to a repair shop. Bearing on back right axle is gone. Wheel wobbly very hot. Anyone else have...

All of my cabinet doors did this. I took the hidges off. Put silocon under hindge, glue and match sticks into the screw holes. Put it back together with less tension on the hindge. So far so good.

I used a bumper mounted spare tire rack to put mine on the back bumper. Seems to work pretty good. I never drove the trailer with it mounted under the front bumper. Did not look like there was enough room under there for it.

My upright post did not line up correctly. I had to drill it out to get the pin to line up. I decided since I leave it up all the time to use a bolt instead of the pin. I used a noodle on the upright pole held on with some duck tape to pad the pole. The first bike is placed on the platform...

I used a closet rod cut to length the round holders allow it to be removed.

In my 2012 30QOK the pump is under the seat in the dinnet the one closest to the door. The other Dinnet seat has the furnace. :DEasy to get to, easy to winterize. :( Takes up space I wish I had for storeage.

With upper and lower bunks you need good air cirulation to prevent one area from overheating while the other area is too cold. I think the solution is to plug in a 110 volt fan if you are running the AC. I installed 2 12 volt outlets to be able to run fans. Wall-Mart automotive section...

Thank you for posting these pictures. Definatly going to do some of these things.

Thank you olyfire for posting these. As they say a picture is worth a thousand words. Great ideas. I plan to try to do the same.

Having tried and failed to ge the right size LED lights off te inter net I would like to see the manufacture have a LED option.

I dropped my North Trail off this morning at the dealer. I have put Less than 1200 miles on the trailer and noticed the uneven wear. Drove it home, two trips and a drive back to the dealer it has only been 48 days that I have had it. They work with a local truck repair shop that they say is...

I do not know enough about brands to answer your question. I purchased an electric jack from Camper World and installled it myself. Only three bolts and a connection to the hot side of the battery. I think having it has made hooking up a quick and easy. I highly recommend having the...

I was able to do this. I reused some shocks from an older camper. I had to add some wooden 2x2 to have attachment points. I will try and get some pictures and figure out how to post. My point would be if I can do it anyone can. I lifted the lid as high as I wanted the lid to open and then...