Search results

we have a 40' 5th wheel with separate garage and love it, gives us enough room to do what we want. looked at other models without the garage & decided not for us for long term trips(over winter).

Have you flushed the tank? Also check the temp probe along with checking the electric element operation.

remember that the covers are plastic material make sure whatever you use is compatible with the plastic

having good luck with Hercules 14 ply 16k 5th wheel dual axle 5th wheel, about half that money

from the tools tab above, https://manuals.heartlandowners.org/manuals/Slide_Outs/Rooms/BAL/accuslide_service-manual.pdf will tell you everything regarding the Accu slide system good luck

RH = counterclockwise LH = clockwise might snug mine up a bit now that I know this

try YOU TUBE for a video, good luck

should be able to order wet bolt kit for whatever pound weight the axles are rated at 7,000 lbs or 8,000 lbs. Is there a tag on the axle itself, that will have the weight on it. I got my wet bolt kit from Morryde for a 7k axle. Also installed CRE3000 equalizers at the same time.

looking like a defective valve seat in the T/P. Take it back & get a new one. At 10 psi the should never weep It is adjustable, yesterday I dropped the incoming pressure to 10 PSI, then ran it up to 60 PSI. Ran water then lowered it to the normal 50 PSI. Still weeps. Grrrrrrrrrrr! Like Quote...

wires weren't even connected to anything inside just loose near the battery box

from your picture pray the cable to the breakaway switch will work correctly when needed!! I'd either rotate the switch upward (direction of pull) OR just let the cable lay out forward to the hitch. If you're worried about the cable being to long & that's why you have it wrapped around the hitch...

I've had mine to that several times; just burped it letting it snap shut & all is good.

that's most likely your vent tube for the fresh water tank

look for a 4" square electrical box w/ cover near the generator compartment. should have the wires going out to the transfer switch.

option is to borrow/buy circuit finder to find where it goes. I've used them & they do work tracing wires circuits

thought I saw a posting where they raised it back up like you have done & re-installed the fascia with better nails/screws to keep it in place. Good luck

that's what keeps the tanks from sagging/dropping down. Larger self-drilling screws will work BUT if possible, use bolts with self-locking nuts instead. Know problem with tank supports.

check the tools tab above & find your unit

about all you can do is continue looking, wrap paper towel around a hose or two try a function & look at the paper towel. Process of elimination done that many times on logging equipment hoses & yes hoses will seep/weep before they burst. Good luck.

Have almost same identical unit 2018 Torque 327, love our unit. Only issue we've had was leaking windows in the garage. Two were replaced under warranty & now the egress one is leaking waiting for warmer weather to try resealing it. Can't help you with the #2 grey haven't had any problems with ours.

FROM THE TOOL TAB ABOVE https://manuals.heartlandowners.org/manuals/Slide_Outs/Rooms/BAL/accuslide_service-manual.pdf. This will tell you all the information you will need to know about the system.

check the circuit breakers for a tripped one; fuses are for 12vdc & breakers are for the 120vac.

from the tools tab above all you will need to know regarding the BAL cable system, they do need some slack in the cables; https://manuals.heartlandowners.org/manuals/Slide_Outs/Rooms/BAL/accuslide_service-manual.pdf

if it's all sealed up I'd say looks about right

Love the table great job. For the hinge holes, get some wood putty comes in various colors

have a 2017 Torque 327, this is a 40' 5th wheel toy hauler with two slide outs. Only issues we've had are leaking windows which was taken care of under warranty. I've added disc brakes & wet bolt kit, changed tires to Hercules 14 ply, we love the unit.

Anyone installed the new Lippert ladder receiver on their RV. I know that the receiver is not a aftermarket item; only installed at the factory on new RV's according to Lippert. Looking for what fasteners you might have used. Cross posted in other forums.

most likely one leg isn't working/connecting from the gen to the panel. Check those connections on the ATS. If you are handy with a volt meter & working with live electricity check voltage in & out of the transfer switch.

Loke Dave stated find a repair shop that does alignments on big rigs & pay them. You will save yourself lot of headaches, sooner or later they will tell you it's not covered under warranty !!!

DATE change rolling in on the 17th now & out on the 24th

not the sail switch then!! Has to be a wiring issue from battery , check the ground wires make sure you have good clean connections.

shackle in pic #4 should be the same as in pic #5; I would screw together couple of 2x8 boards stacked on one another with a tapered end to back up on; even a third one if needed & long enough for both sets of tires to sit on

look under the tools tab above to troubleshoot your furnace, could be the sail switch; if that doesn't work the ignitor will not work!

I agree with Cookie, that's going to take major repairs at a shop that has the knowledge & equipment to make frame repairs.

Does it work off wall switch? If not check for voltage at motor when switch is activated with 12 vdc tester. Check 12vdc fuses in fuse panel. If you have voltage at motor then gonna be the motor,

2018 Torque 327 only had two problems with two windows in garage that leaked. Warranty took care of that problem. Other problem was the shotty factory job of the ac ducts not being sealed at the air plenum and I repaired that.

has to be the line/hose connected to the stove; follow those make sure not pinched off. If it looks good then could be a plugged line.

is the furnace or hot water heater working? In colder weather if tank is low may not flow enough.

al brands have issues, read some of the posts on other groups & you will see other complaints

this link https://manuals.heartlandowners.org/manuals/Slide_Outs/Rooms/BAL/accuslide_service-manual.pdf is from the tools tab above. user guides, explains all about the cable slide out systems; 1" slack is normal in the cables if I remember correctly. Read thought it for cable adjustments.