Search results

Did you try running a coax directly from the antenna into the window and connect it to the back of the tv.?

Is your antenna pointing in the right direction. Try the app antenna point to verify the right direction.

Are the channels clear or pixilated?

Oh, and your satellite feeds should be in your wet bay.

Yes I understand that, but you should have satellite feeds to each tv. If you look at the booster in the bedroom, is there 2 coax connectors there, 1 for antenna and the other for satellite feed. Behind the livingroon tv, on the faceplate for the antenna connection, is there another 1, it's...

Yes, then where the tvs are, you need to move the coax from antenna to satellite.

If you have an exterior antenna, use a splitter and connect to the satellite feeds to both tvs. This is what I do and it works great.

https://www.amazon.com/Repalce-DOMETIC-3310423-209U-Assembly-Extension/dp/B0BRWGS48Q/ref=mp_s_a_1_1_sspa?crid=247BCIAWHZZMQ&dib=eyJ2IjoiMSJ9.FlfgzhOr7Qfeu2IXff7gwA7BAuN7IaIur6QPVUec_mSdwpFzJN0S9Z8HVLJh1TQsuV2vcGyGhxnj94Jaqf1Y1V8aUo4VSG0YgvOQgVRWDNr_XsIODttlXWoLrjBF_fDlm8sLOCDoFp_nhYyKBlV7focm34Nt...

You have to figure out what awning you have, should be a tag on the roller, but of course is you cant get the awning out, you can't read the tag. Should be a 9100 or 9200 if it's a Dometic. Google is your friend.

This is where mine leaked, down at the bottom of the slide. Water was running in, I removed all the screws, which were rusted, and out new butyl caulk on and new screws and then caulked the entire metal strip. No more leak. Also check the caulk around the face of the slide, it's like the outer...

Oh, and I did replace the bathroom skylight as ours was all faded and looked like it was just waiting to crack. Bought a tinted Lexan skylight from eztopsworldwide.com

We paid $8200 2 years ago, and yes, they spray right down to where the gutter is attached. So no more caulking there.

I seem to be having to replace the little on/off switch mounted on the water heater every year or so. The conne tor on the switch melts and the switch fails. But that doesn't explain why it doesn't work on propane either.

We had it done 2 years ago, so far so good.

The shop in York PA also has a shop in Newark Delaware, no sales tax, might save you some money there.

I had the same problem until I put screws in each end and it hasn't come out yet. My vertical seals have caulk in the side so they are caulked to the camper. Maybe try that on the ends.

Was there any Landmarks there?

My camper is 43 feet, it was $8k. I took the camper to York, PA, but now they have opened a shop in Newark, De.

I had the same issue and same choice from Dicor, but also had a choice of $2750.00 and new material. I gave the material away and had Flex Armor sprayed on.

Ours is a side by side, so we put 3 peices around the 2 handles.

We use the velcro straps also.

I have a whole house filter that I use, just leave the filter out, put the bleach in and screw the housing back onto the top.

ILH, would you mind explaining what the DC to DC charger is and the secondary cable is all about. Thanks.

WOW, nice clean job.

Yeah, that's pretty much what happened to ours too.

Our pump sounds like a steam train pulling out of the station.

Route master, did you figure out what the noise was?

Here are 2 pics of my tv hinge and the lock.

Here is the pic of the entire cabinet where the tv is. My latch is on the left side of the cabinet.

Here is a picture of my latch and how high up it's mounted.

I dont have Madison, but my 2016 LM Orlando has a strap in the bottom left corner thats releases the latch And the tv swings to the side. Does yours swing to the side?

Splendide support tried to tell me it was a bearing in the motor or the drum, I disagreed with him and I don't think he liked that. Try setting the knob to drain, no water, and see if it makes the noise. If not, set it for spin, no water, and see if it makes the noise then.

Routemaster, that looks just like the 1 i had and bought from Westland sales. But it didnt solve your problem?

Jerry, That link you sent, the picture looks just like the pump I bought from Amazon,. But it's just too bug around to fit into the hole.

So I bought a pump off of Amazon that looked like it would fit, I didn't. So I just called Westland sales and bought the replacement from them for $139.00.

I did pull it out and it had this Grey goo in it, cleaned it all out and tried to find the numbers on Google, it took me right to Amazon of course. Most of the pumps look the same, so I picked 1 that has the best reviews. It's only $30.00 compared to Splendide wanting $140 for pump and housing.

Hi all, Has anyone replaced just the pump on their washer. Splendide wants to sell me the entire pump and housing, but I'm trying to find just the pump. Does anyone have a model number for just the pump, I see a few on Amazon, but they are for an LG or Kenmore. Thanks.

We drilled it today and put the pin in and it works great. So I would say if anyone has this issue, it was really easy to fix.

We did Google the number stamped on the gear, but found nothing.

We pulled the motor out today and we found that the gear, the peice on the very end inside the roller tube, had stripped. The shaft is flat on 2 sides and the gear has 2 flat sides also. So we stripped the gear, so we are going to try to drill a hole thru the shift and the gear and put a pin in...