Search results

Should I be concerned? I replaced all the bad wire and made sure the connection was good. Would it be wise to maybe put a breaker or even a fuse at that connection? The wire from the gen to the junction box is stranded, from there it is romex to the xfer switch.

So last weekend I took the toy hauler out and was running my A/C, next thing I know, no AC power from Gen, figured the transfer switch went out, gen was still running strong, only has 35 hours on it, replaced the switch today and still nothing. Figured I better trace power from Gen to the...

Leaving on the 26th, ice coolers it is. Sent from my iPhone using Tapatalk

Thank you, I am still in denial because it’s brand new but I pretty much knew it was toast, will contact dealer tomorrow. Sent from my iPhone using Tapatalk

It’s definitely leaking, I felt the tubing and it was wet with oil Sent from my iPhone using Tapatalk

Are you serious? I have only pulled this thing from the dealer to the house. Sent from my iPhone using Tapatalk

Bought a 2018 Heartland Torque T322 about 2 months ago, we have been planning a trip to Moab Utah in a few days , thought I would get everything un-winterized, I have a fridge outside and inside, I have the rig plugged in and thought I would get the fridges up and going, outside fridge works...

yea, now that I know that the wires are 8 gauge I am thinking of going with a couple 12v 110w panels, I am currently the district sales manger for a Automation-x, we supply renewable energy for 90% of the gas wells here in the basin. we have tons of panels that we get for demos. I love this...

Just picked up my 2018 Torque T322 a few weeks ago so cant really give a good review on it yet, love the lay out, my 2017 Polaris General 4 fits perfectly in the garage, the only problem I have had was the "Wired for Solar", please read my thread and be sure if you intend to add solar that you...

Re: wired for solar GO POWER **UPDATE** 2018 Torque T322 I finally was able to get in touch with Heartland, they assured me the solar pre-wire was installed and that the wires should be 8 gauge, I got to thinking maybe they dropped the wires in the run next to where the cut out is, only way to...

When you found your wires what color were they? were they capped off or just cut and coiled up? were the wires from the batteries the same color as the wires coming from the roof? thank you,

my sticker is about 2' above my fuse panel, the control panel is on another wall right as you walk through the door, I will remove it tonight to see if maybe they just put the sticker in the wrong place. I will also be contacting heartland again today, hopefully i will get through. thanks for...

Correct, this is more than just the Zamp outside connector, I have contacted Heartland but was on hold for more than 30 minutes.....the drop for the wires on the inside wall was not there, I have tired for hours to try and locate where they dropped the wires inside.......no luck. hopefully...

thank you,

I will be only using a 50 watt solar panel to keep my battery(s) "topped off", no plans to run inverter. I did purchase the GP-PWM-30 charge controller, cut out the decal where it was labeled on the wall but no wires. I will look near the front by the batteries to see if maybe they ran the...

just purchased a new Torque T322, it had a decal on one of the inside walls that stated it was wired for Solar, the decal is also a template to cut out and install the charge controller. I just cut it out and there are NO wires at all running in that wall. my Torque does have the connectors on...