Search results

Not much wiring in outside walls, all wiring is from inside out. The walls are built off unit then assembled. A few wires get punched thru from inside for your lights or speakers, but no wires that I am aware run thru walls. I just screwed my mounts to the inside wall, yes it is thin but no...

My brother in law has this gadget, WalabotDIY, it can Give you a visual of wiring and studs, metal or wood. The outside wall has a solid enough backing I haven't had any issues with screws coming out on there own. The interior wall honestly I was concerned but no movement, leave bath towels...

Unless something has changed in the 3760EL since my 2016, it is the ONLY 5th that has a spot for TP! All you do is knock out the square blank that between the upper and lower linen closet, run to Home Depot or Lowes and buy an old fashion in the wall square TP dispenser. Easiest ever up grade...

I like the golf shirt idea. Sent from my VS988 using Tapatalk

Great idea, thanks! Sent from my VS988 using Tapatalk

I didn't change the pig tail, however I do have gas when opening the threaded line after the new regulator. I am not going to take the 5th to the dealer, I will stop there and speak to the techs. I can certainly fix it myself by changing enough parts, just trying to avoid that step. I am 99%...

I am having a similar issue, I can't get propane from doorside to off door side. I have changed the door side regulator, I have gas when opening line on non tank side of regulator. So I know regulator lets propane pass thru, I have NO gas coming across to off door side when separating line...

2 weeks is very difficult for most people, however a professional truck driver like you can run out in 3 days, 3 long days! I have done it more than once. You will spend lots of money on fuel, but having your bed and food is priceless! I have done it with 5th wheel and with mini van. Last trip...

Some units were produced with out bladders on the slide outs. I believe it was fairly short time line 6 months or so, but I have one. I had a temporary repair done at the rally by some AWESOME, KNOWLEDGEABLE workers. Anthony, John and Chris had me fixed up and no time. That night it rained and...

RVROOF.COM Didn't see any locations listed in the north west but make a call, take a trip, never worry about your roof again! Sent from my VS988 using Tapatalk

We have a 3760EL and live the big windows! My wife loves the view. We have plenty of storage space! No need for the cabinets above the dinette. Sent from my VS988 using Tapatalk

I personally don't think those fuel saver wings, fairings or tail wings will prove any savings on fuel verses initial costs. If you gain 1 mpg, how much would you save in an average year? Sent from my VS988 using Tapatalk

KOA Watkins Glen is beautiful also, Sampson State Park over looks Seneca lake, smack in the middle ofvwone country if your interested. Sent from my VS988 using Tapatalk

I agree with cable issues, I had one piece of coaxial I used cable and a better 50' I used for dish. 1 time mistakenly grabbed the cheaper cable, nothing worked, called dish, went nuts trying their cures, finally realized the difference, changed coaxial .....bam fixed! I no longer carry that...

If we order now will they bring steps with them to the rally? Sent from my VS988 using Tapatalk

Not to add too much, but any interest in local wine for the spouses that don't like beer? I know I cant believe I either, but I guess not everyone loves beer. Brian

My last truck I ran over 60,000 miles with no issues with the RDS 60 gallon combo gravity fed and my new truck has the 45 gallon, only traveled 2500 miles so far but it seems to work for me just fine. Sent from my VS988 using Tapatalk

My Bighorn just got repaired from the exact issue. Built December 2016 discovered issue April 2017, huge bubble just like yours. My dealer Wilkins RV in Bath, NY and Heartland were great! It was covered under warranty even though it was a couple of months beyond. I had also caulked my roof a...

If you use rubber hose on your vent just let it curl around 3 times in a 4" coil and ziptie it towards the top of your box you won't have any spill from vent. Sent from my VS988 using Tapatalk

You should be pleased with the Excursion with a V10. That thing is a pulling machine Sent from my VS988 using Tapatalk

Any dealership can install. your B&W turnover, they send very good instructions and its very easy to install. You have 3 height setting on your companion, pull your upper hitch off and you will,see the galvanized uprights on each side with several bolt holes and 4 bolts for the 3 height...

LMAO Sent from my XT1585 using Tapatalk

I was considering doing the same thing with mine, the Dodge dealer says they are aluminum lined valve stems, so there is additional strength there. They also make internal sensors that are placed inside the wheel and have a band that holds them secure to the wheel. Sent from my XT1585 using...

http://giraffeg4.com/rv-info/ Sent from my XT1585 using Tapatalk

Giraffe G4 collision detection Sent from my XT1585 using Tapatalk

I mounted my outside receptacle to the hitch, ran the hose and wiring thru the hitch then between the frame and 'skin' to the front compartment, from there I ran the hose and wire to the right side propane compartment then into the basement, along the top channel. Sent from my XT1585 using...

I ran wiring from hitch also, I first ran an old piece of garden hose then slid the wiring inside of that for protection. I don't have gen prep, used a 50 amp automatic transfer switch. Sent from my XT1585 using Tapatalk

I am thinking of switching from the EU 3000 to a pair of EU2000's for the handling. The 3000 takes lots of space and is difficult to load and unload. I realize that makes it harder to steal but they make some really nice looking lock downs for the 2000's Sent from my XT1585 using Tapatalk

10! I was so convinced on my first 5th wheel that I got my current rig changed over before leaving Elkhart. Sent from my XT1585 using Tapatalk

Another B&W fan here! Sent from my XT1585 using Tapatalk

I bought a rubber cow bedding mat from tractor supply, cut it to fit and placed it in the bottom of my front compartment. Works great, stays dry and nothing slides around. Sent from my XT1585 using Tapatalk

The roof change is they are going to roof bows and away from the molded roof. No more styrofoam, I understand it will be wool insulation like DRV. Sent from my XT1585 using Tapatalk

Ditto Sent from my XT1585 using Tapatalk

I had disk brakes on previous Bighorn, I saw such a dramatic difference when I purchased my current Bighorn it went to MorRyde to get disk brakes before I bought it home. I KNOW disk brakes saved me from one very close call. Never will I have drum brakes on an RV again! Sent from my XT1585...

Thanks I will order the 4 step Sent from my XT1585 using Tapatalk

I have been contemplating between the 4 step and 5 step for a month. I have 38" - 39" of height on most sites, but occasionally I have 40". My dog would love a shorter step is the reason I am considering the 5 step, looking for input. Thanks Sent from my XT1585 using Tapatalk

The additional money is due to height, anything over 12 feet I believe gets a higher rate. Sent from my XT1585 using Tapatalk

Probably it was a dealer that may have either stretched the truth or misunderstood your situation. Weather thru Ohio has a pretty big swing also, a winter in Cincinnati is different that Cleveland. That 15 -20 degrees can be the difference of yes it will make or no way. Sent from my XT1585...

Re: Bighorn. NAME MP_CS Not trying to get anything going here, I said my peace. I just want to point out to you that they are building this unit right now, it's called the Oakmont, it is not a new line or new idea. They are just trying to get people's attention by using a good and trusted...

Camping world had the best price when we were shopping. We love it so much we will be purchasing another for home. Sent from my XT1585 using Tapatalk