Search results

This should solve your issue.

Please add Kathy & Randy Reano

Geopixie Sent you a private messag.

Typically there for the Welcome Back light operatio.

It’s possible the previous owner shortened the pipe and tucked it back up in the coroplast. Many have completed this mod to allow camping in freezing weather. Thereby minimizing the chances of the drain freezing. My suggestion would be to check around the axels for a possible access point that...

If you have a wet vac remove the grill cover snake the hose down the flex duct.

I would suggest Tredit Tire they supply most of the wheel. www.tredittire.com

I would suggest. They were able to obtain graphics for my 13 last summer. if Suzette Messenger is still there she is outstanding in matching up the correct decal. http://graphicsrv.com/ 574-674-4156

Installed the Furrion Vision S 5” system along with side cameras. At this point I’m satisfied with the performance.

Ordered replacement for our 13 LM. Contact Graphics really.com 574-674-4156 Great company to work with.

Re: 2021 - Goshen Rally - Deferred Jim Sorry to hear the rally has been canceled. Though based on current trends in my opinion it was a intelligent move to keep all involved safe and healthy.

If your in the Aransas Pass area of Texas I’m willing to assist installing.

Amazon is your friend

This is how I did mine. Though I didn’t have any broken cables. Tools requiredprocedural list that might help. 2 - 7/16" wrenches. Phillips screw driver (powered preferred) but not necessary. Run the slide out Remove mattress Remove one end of each of the hydraulic supports from the bottom...

After having to replace the power reel on my unit and speaking with Tech Support at Shoreline. I discovered the folding. My original spool was model CL50D the replacement unit is a RL54 series. The original unit came from the factory with a single pole switch. This only allows the reel to...

Thanks for the information. Wonder if the new motor I’m getting will also need a different switch. Guess we’ll see after UPS delivers today.

After troubleshooting discovered my motor is shot. Replacement is to be here today. I’ve had my unit since 2012 and either missed or glossed over correct operation of the reel. All I’ve ever done when hooking up to electric was pull cord out to desired length and when ready to leave push button...

Thanks everyone for the suggestions/ideas. Will tackle it later this week.

Went to use our rig last week. Had about 3’ of cord pulled out while in our garage. Pushed the retract button reel went in sounded a little rough. Arrived at our site and went to pullout. Would only allow about the same 3’ and was firmly locked at that point. Thought would try and retract...

I would suggest Performance Trailer Braking. Michael & Kelly Barnett. 405-626-7009 kelly@performancetrailerbraking.com Outstanding group to work with.

Gary Based on your email those that lost their deposits will also be receiving checks?

If your thinking of going with Dish download the app DishForMyRV. With this on your smartphone or tablet you’ll be able to determine if you have clear line of site. Dish uses the following satellites 110-119-129. Most all of the HD programming is on 129.

Can you supply a photo of the drain line this screws into?

They are definitely in the roof.

Not saying HL should but appears others are canceling or postponing. I agree with the other weight your risk factors and use common sense. With escalating concern regarding the COVID-19 virus, and the Tucson mayor’s recommendation on March 12, 2020, that large gatherings be postponed, on...

I don’t you might check with the Longmont service center. Sorry

Part #31107 available in white or black. Call HL parts.

Helped my cousin get ready for an upcoming auction 10/19. The owner passed and had this beauty in his garage.

When our LM was damaged by hail Windish RV in Longmont was unable to obtain replacement decals from HL. They contacted a graphics company out of Greeley, CO. I believe. They were able to match perfectly the damaged ones.

Jeff & Kelly Sorry Kathy and I are going to have to cancel.

These are what I ordered from Amazon.

This is the method I used after seeing another HL member did it. Tools required 2 - 7/16" wrenches. Phillips screw driver (powered preferred) but not necessary. Run the slide out Remove mattress Remove one end of each of the hydraulic supports from the bottom the bed (storage access). (you'll...

Hi Jeff We’ll arrive 9/17 and leave 9/22. Rig is 40’

You need to unscrew the top chrome ring. Doing this will allow the cartridge to be removed. I sure water is off.

Auto Fan When “AUTO” fan is selected, the fan speed will vary depending on the difference between the temperature set-point and the room temperature. In “AUTO” fan, the compressor and fan will cycle ON and OFF with the thermostat. When the difference is: 8 °F / °C or more 5 to 7 °F / °C 4 °F...

Cabela’s in Sidney is about 4.5 hours south of Custer. They also have a FHU campground beside the store.

Thanks everyone. After sealing with with black foam and the inner tube truck haven’t seen any of the little buggers in 4-5 days. They we’re coming up from basement through the kitchen sink drain/waterline access. One thing did find out Fresh Cab doesn’t deter them. Had a new pouch pushed in...

At a Texas State Park and having minor issues with rodents. Sealed all areas with foam and steel wool. Not sure how to seal around the frame where the hydraulic ram exits. I have stuffed steel woo, for temporary fix. Ideas?

Fairly disappointed someone removed my email ....Would appreciate knowing the individual and why. --- sending you a PM --- Dan Mayer

Great question John on my mind also. Especially since we only need to register for the national starting in March for a June event.