Search results

2018 Idaho Tote 8’ long, shocks, 15” aluminum wheels with spare. 2” ball tongue adaptor as shown in pictures. Comes with ramps. Used three times. Garage kept when not in use. $9,000.00 new asking $7,800.00 Can be towed behind a fifth wheel or travel trailer to haul two quads a golf cart.

Jbeletti If I bring my golf cart on my tote that will make me over 50 feet. Is there a place to drop a trailer for the length of stay at the event?

WDK450 The bulletin the you referenced is exactly the one I went by. I did it because it gave me piece of mind knowing that the spring hangers were braced more solidly. My Landmark is heavy and the hangers take a lot of stress when the rig has to be jacked hard in a turn. - - - Updated - - -...

I just finished fabricating and installing the three spring shackle cross braces according to the Lippert technical information bulletin. I’m not sure that they are necessary but I feel a whole lot better with the braces in place. I know how the axels and tires twist during a hard turn on...

Bill, Here are some pics

Jerrod, My numbers are almost identical to yours. The only difference is I have an 8kw onan in the front and a 50 gallon fuel tank under the frame.

In my Landmark I removed the kitchen island switch from the KIB lighting control system and installed a switch with a dimmer to control it. I also added a motion sensor inside the control cabinet connected to an led strip.

I did and it made me feel a whole lot better.

I replaced all of mine and added a buss bar.

We are planning a trip this winter leaving PA in February and spending a week in Orlando at Disney Fort Wilderness. We are then going to drive 10 across the country to San Francisco to visit our son and family. We would like to be able to take our time and not be on a schedule with campground...

The train brakeman said that there are only about 15 days a year when the weather is clear. I guess we were lucky. Would have liked to see a moose.

We just spent the week in the White Mountains region of northern New Hampshire. We climbed Mt Washington in the steam powered Cog Railway. It was 52 degrees at 6900 feet and 20 mph winds. The sky was clear with fantastic views. We also went to the Franconia Notch State park and took the tram car...

Covered Wagon, Here is a picture of the 7’ stepladder in my box. Just so you believe me.

Travel Tiger We are pretty fortunate where I live because there is a really good scrap yard nearby that gets a lot of aluminum and steel from different manufacturers in the area. The aluminum probably cost about $25.00

We use a dish network traveler roof mount automatic. I have three TVs hooked up to it ant it works great. We turn the service on and off by the month as needed.

Here is a picture of my upgraded system.

We were not happy with the kitchen light over the island so I made a new maple box but not as deep as the old one and stained it to match the existing cabinets. I also removed the kitchen light circuit from the lib system and installed a separate dimmer and switch on the wall under the...

Mine does the same thing. Tried cleaning it off before putting the Dicor roof protectant on. I got about 1/2 of it off but still can see the stain. I’ll try the 30 second cleaner.

I have a 2017 Charleston with the small fringe in the rear outside compartment. I just added a 400 watt inverter and a separate circuit to run it while we are traveling. I used the inverter with an automatic transfer switch. The set up works great

I bought a 7 foot folding step ladder and constructed an aluminum diamond plate box to store it in next to my sewer hose holder. The box is 4”x5” and 86” long.

Porthole Do you also have a diesel or is it gasoline?

Porthole i can give you the technicians name and phone number who took care of me if you like. .

Thanks for the nice comments. We will see how the drawer works this weekend. Leaving Charleston Virginia to see Monticello and surrounding sites. I’ll see how many times I need to get the step stool the help out my wife. Lol

I spoke to PCS about putting my 8kw diesel genset in my 365. They told me that the head was programmed to manage a max of 5.5 KW. I would not be able to get the full power out of the 8Kw. They programmed a new head and sent it to me to match the 8kw power supply. Now I am set and the unit works...

I purchased a two drawer 99” long under frame storage box to keep blocks, my extra 50 amp extension cord, etc. After receiving it I was a little disappointed in the design. Mainly in the watertight area. Having it mounted behind the axels and in front of the spare tire rack I think the water...

If you want to private message me I can go over the details of my 8 kw diesel install. It works great!

Yes you definitely need something to reinforce the inside skin of the door because it is paper thin. I just couldn’t get myself to drill a hole through the outside.

I was tired of always hanging on to the door on the road side basement access. I installed a gas assist strut and a brace on the door for strength. Now the door opens past 90 degrees and stops. No more flying around in the wind.

I’m updating the diesel generator install. Almost complete waiting for the pipe from the exhaust shop. But the rest is complete. The tank is in and all piped. Installed a water/ fuel separator ind tied into the KIB panel for remote start/stop. I installed a fuel sender in the tank and a gauge in...

I added two wall brackets in the living room. I took the blue led strip that lighted the interior of the cabinet above the sofa and disconnected it and removed it. Then I fished two wires to each side of the sofa and mounted the wall lights. I used the old led light feed to power them. The led...

I added a tv in the basement and put it on a swing arm mount to allow watching it from different angles. Then I fabricated a cover to protect it from some aluminum diamond plate. The cover is hinged to the ceiling with a piano hinge and latches to the floor and to the ceiling when the tv is in...

My kitchen island light was connected to the edge lights on the KIB system. Every time you entered the coach the cabinet door had to be opened to turn on a light other than the walkway/kickspace lights. I located the kitchen light wire and removed it from the KIB panel leaving the edge lights...

I built a drawer and added sliders to make the space above the refrigerator more accessible.

Here is what I did with mine. I taped it into the junction box and put a swoith and a fuse in to protect it.

If we go it will be at the last minute. I don’t think I will have everything back together by then but it is possible.

I completed the lower support structure and added the Dynamat to the enclosure. Bolted the generator to the support angle iron and raised it up from the bottom with two floor jacks. It went up real smooth and easy. I bolted the cross members in place. Did the power wiring pigtail and the battery...

I raised the unit up from the floor through the bottom. The base plate has a 2” lip all around the perimeter of the generator base. When it is up in place the base plate seals against the bottom of the old floor. My angle iron will support the base plate from the frame rails. I raised the camper...

Got the generator in place for a trial fit. I have 1” on the left and the back and 1.5” on the right side. Onan only calls for .25” inch clearance. I’m going to put in the Dynamat for extra sound deadening. I have my fuel tank ready to go underneath behind the frame drop. I’m going to support...

Started on my diesel generator project today. I got the floor cut out and made a new sheet metal enclosure for it. The box is about 4” longer

Greg furnished the 4x4 square tube with the two 2” slugs welded in to match the trailer. I added a third in the center for a bike rack when not towing the trailer. I had to supply the 3/8” plate for the drop down sides and cut the tubing to fit my frame centers. I also have to weld up the L...